Johnson Service Bulletin SB-1344 - Lockout Lever #317657

Issued May 1974, this factory safety notice warns that removing the starter lockout lever on 1973 and 1974 Johnson 20, 25 and 40 H.P. outboards can allow the engine to start in gear.

Johnson Service Bulletin factory letterhead
SB-#1344

May, 1974

SUBJECT:  Lockout Lever #317657

ON MODELS:  1973 & 1974, 20, 25 and 40 H.P.

Safety warning triangleSAFETY WARNING

We have received reports from the field that some owners are
removing the #317657 lockout lever from their outboards.

Removal of this lever will permit the operator to start the
outboard in gear eliminating the "start in neutral only"
feature which is specifically mentioned in the owners manuals.

Whenever any of the models which incorporate this lockout
lever are brought in for service and you see the lever has
been removed, the owner should be advised that the lever serves
a definite safety function and should be reinstalled to prevent
accidentally starting the outboard in gear at any throttle
setting.

JOHNSON OUTBOARDS

D. J. Leinonen
Technical Data Coordinator

DJL/sn

NOTE:  Post on your 20, 25 and 40 H.P. indexes under the heading
      "Powerhead".