Johnson Service Bulletin SB-1372 (February 1975) - Leakage at Oil Fill/Drain Hole

Johnson advised dealers that some 1975 model 4W75 outboards built before serial number 4149941 could leak gearcase lubricant because the oil fill/drain plug holes were insufficiently threaded. The bulletin explains inspection and replacement of both plugs with shorter modified versions.

Johnson Motors Service Bulletin factory letterhead
SB-#1372
February, 1975 SUBJECT: Leakage at Oil Fill/Drain Hole ON MODELS: 4W75 It is possible that some model 4W75 Johnson Outboards prior to serial number 4149941 may leak gearcase lubricant from the oil fill/drain hole. The hole may not be tapped deep enough keeping the gasket on the plug from sealing. When a 4W75 comes in for service due to oil leaking from the fill/drain hole, check the threads for depth. Be sure to check for porosity in the casting, a missing sealing washer, oversized (loose) threads or a cross threaded screw. When it is determined that the lubricant seeping past the sealing washer is due to an insufficient number of threads, order modified plugs from Johnson Outboards Service Department Desk J-3710, Waukegan, Illinois 60085. A request sent on a quick letter or postcard is acceptable, however, be sure to include the model and serial number of the engine requiring shorter plugs. Replace both plugs with the shorter ones obtained from us. The original plugs can be added to your inventory and used on other engines. JOHNSON OUTBOARDS D. J. Leinonen Technical Data Coordinator NOTE: Post on your 4 H.P. index under heading "Lower Unit". DJL/kr

Historical reference

Factory bulletin SB-1372, February 1975. Applies to 1975 Johnson 4W75 outboards before serial number 4149941. Factory text is transcribed for search and accessibility; the shared factory header is referenced separately.