Johnson Service Bulletin SB-1384 - Incorrect Model/Serial Number Plates
Issued July 1975, this bulletin identifies incorrectly marked 1975 70 H.P. Johnson outboards and explains how to distinguish hydraulic-assisted B-series shifting from mechanical E-series shifting.

SB-#1384
July, 1975
SUBJECT: Engines with incorrect model/serial number plates
ON MODELS: 1975 70 H.P. 70ESL75E
As you know, we made a running change to the gearcase design
of the 1975 70 H.P. engines. The first series, identified
by the suffix letter "B" in the model number (as in 70ESL75B)
have a hydraulically assisted shift mechanism. The second
series, identified by the suffix letter "E" in the model
number (as in 70ESL75E) have a pure mechanical shift gearcase.
We recently learned that a quantity of second series "E"
models were incorrectly equipped with model/serial number
plates indicating they were first series "B" models. This
could result in confusion when ordering service parts.
Engines which have an incorrect model/serial number plate
fall within the following serial number block:
Model Number Serial Number Block
70ESL75 4293261 thru 4294831
If you had been shipped one of these engines, you would have
been notified by certified mail and supplied with corrected
model/serial number plates.
If a 1975 70 H.P. engine falling within the serial number
block shown above is brought into your shop, check the suffix
letter. If it is "B", it is incorrect, and the plate should be
replaced. Contact the Johnson Service Department at once for
further information.
PAGE 2 SERVICE BULLETIN #1384
JOHNSON OUTBOARDS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085
The pictures below show several of the easily identifiable
differences between the "B" and E model.
JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator
NOTE: Post on your 70 H.P. index under heading "Lower Unit."
DJL/kr
B

E
