Johnson Service Bulletin SB-1399 - Change in Carburetor Orifice Size

Issued in December 1975, this factory bulletin documents revised carburetor orifice diameters for 1976 Johnson 55 and 75 H.P. outboards and cautions dealers to match orifice sizes across carburetors.

Johnson Service Bulletin factory letterhead
SB-#1399

December, 1975

SUBJECT: Change in Carburetor Orifice Size

ON MODELS: 1976 55 and 75 H.P.

The carburetor orifice diameter on several 1976 models has been changed.

1. 55 H.P.:

The orifice diameter on 1976 55 h.p. models has been increased from .053" (P/N 321297) stamped 53D to .054" (P/N 321407) stamped 54D. If replacement of an orifice is necessary, replace both orifices with 54D (P/N 321407)

2. 75 H.P.:

The orifice diameter on 1976 75 h.p. models has been reduced from .056" (P/N 318684) stamped 56D to .055" (P/N 320921) stamped 55D. If replacement of an orifice is necessary, make sure it is the same size as those in the other carburetors on the engine.

All service carburetors currently being shipped for 55 h.p. engines have the 54D orifice while those for 75 h.p. engines have the 55D orifice. If you replace a carburetor on one of these engines, make sure the orifices in the other carbur- etors match the one in the new carburetor.

JOHNSON OUTBOARDS D. J. Leinonen Technical Data Coordinator