Back to previous page

Johnson Service Bulletin SB-1424 (June 1976) - Flywheel Key Installation

Johnson's June 1976 service manual correction clarifies the proper flywheel key orientation on 200 HP outboards. The flywheel key must be parallel to the crankshaft center line.

Johnson Motors Service Bulletin letterhead
SB-#1424

June, 1976

SUBJECT: Service Manual Correction

ON MODELS: 200 H.P. Flywheel Key Installation

The 200 h.p. Service Manual, page 4-19, figure 4-31, should
show the flywheel key parallel to the crankshaft center line.
See figure below. Please correct your service manual as shown.

Figure 4-31, correct flywheel key installation, key parallel to center line and stator screws
Figure 4-31. Correct Key Installation
JOHNSON OUTBOARDS

D. J. Leinonen
Technical Data Coordinator

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Universal Flywheel Puller Kit & Valve Lapping Compound

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.