Johnson Service Bulletin SB-1454 - Ignition Coil Internal Changes

Issued March 1978, this bulletin describes revised ignition coil windings, resistance checks and factory test specifications for five Johnson ignition coils.

Johnson Service Bulletin factory letterhead
SB 1454

March 1978

SUBJECT: IGNITION COIL INTERNAL CHANGES
    P/N'S 580688, 580730, 580740, 580847, 580833

MODELS AFFECTED: 580688 - 1968 65 HP, 580730 - 1970 115 HP,
HIGH PERFORMANCE V-4,
580740 - 1970-72 85, 100, 115, 125 HP
580833 - 1971-73 50 HP & 580847 - 1970-71 60 HP

To improve their performance, a change has been made in the windings of the coils listed above.

We do not feel that the change was drastic enough to require a change in part number; however, we feel a need to inform you how you can determine whether the coils you have in stock are of the former windings or whether they are the improved windings. To check this, measure the resistance between the blue primary lead and the high tension (secondary) lead. If you get a reading of 1300 ± 200 ohms, it is the improved winding. If you get a reading of 1900 ohms, it is the former winding.

If your coils have the new windings, use the test specifications listed below.

Factory ignition coil test specifications for Stevens, Merc-O-Tronic and Graham testers
PAGE 2SERVICE BULLETIN  SB 1454

If you have coils with the old windings follow your normal procedure outlined in the appropriate service manual.

The performance of the motor will be the same with either coil, only the test procedures are affected.

It is absolutely necessary that you follow this procedure so you are not mislead by the readings you receive during your troubleshooting process.

JOHNSON OUTBOARDS
D. J. Leinonen
Technical Data Coordinator

NOTE: Post on 2 cyl. 50 hp 3 cyl. 65 and all V-4 indexes under heading “IGNITION”.

CORRECTION: On Service Bulletin #1445 please change the part number of the coil in paragraph #5 to 581786.

CR78-26

Related factory publication: SB-1445 (coil part-number correction to 581786).

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Outboard Ignition Spark Tester & Digital Multimeter

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 580688

Search for original or compatible replacement part 580688. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.