SB-1465 - 1978 140 H.P. Idle Air Bleed Restrictors
Issued May 1978, this Johnson Service Bulletin identifies missing carburetor idle air bleed restrictors on some 140 H.P. engines and lists the correct replacement parts for early and later carburetors.

SB-1465
May 1978
SUBJECT: 1978 - 140 H.P. IDLE AIR BLEED RESTRICTORS
We have been informed that some 1978 140 H.P. motors have left the factory minus the Carburetor Idle Air Bleed Restrictors. If you have encountered a new 140 H.P. that either won't idle or is so lean that it has a rough irregular idle, check the carburetors to make sure these Idle Air Bleed Restrictors are in place. They are located in the bottom of the carburetor bodies, as shown in Figure 1.
For first production 140's with carburetors numbered 388864 and 388865, the idle air bleed is 318494 (.036). For later carburetors 389785 and 389784, the restrictor is 318073 (.025).
CR78-34
Johnson Outboards
D.J. Leinonen
Technical Data Coordinator
D.J. Leinonen
Technical Data Coordinator
NOTE: Post on 140 h.p. index under heading "Carburetion".
Factory reference
Early carburetors 388864 and 388865 use restrictor P/N 318494 (.036). Later carburetors 389785 and 389784 use P/N 318073 (.025).