SB-1479 - 1978 150 H.P. High Speed Orifices

Issued in August 1978, this Johnson Service Bulletin directs dealers to replace early 150 H.P. carburetor high-speed orifices and correct several factory manual and parts-catalog entries.

Johnson Service Bulletin letterhead
SB-1479
August, 1978
SUBJECT: 1978 150 H.P. HIGH SPEED ORIFICES
First production carburetors on the 1978 150 H.P. models used high speed orifices (50c), P/N 324906. A running change was made to (51c), P/N 323938 high speed orifices. This change was made to improve engine durability and performance.
It is very important that the 50c orifices in the early series engines be changed to the 51c orifices particularly when a surging condition or loss of power is noted.
To determine what high speed orifice is in a particular engine, it will be necessary to remove one of the orifices and check the number on the orifice.
If you encounter engines that require the 51c orifices, you must contact the Johnson Service Department, Desk J-372, and supply the model and serial number of the engine involved. The necessary orifices will then be forwarded to you for installation.
We will allow .5 hr. time for changing of the orifices.
CORRECTION TO SERVICE MANUAL (1978)
150 HP SPECIFICATIONS
pg. 2-2
We have found an error in the specification for the high speed orifice plug which was part # 322664. (Hole size 0.045")
The correct high speed orifice should be # 323938. (Hole size 0.051")
Please make this change in your service manual on the specification page 2-2.
For other carburetor changes and improvements on the 1978 models, please refer to Service Bulletin # 1462.
Correction to 1978 Parts Catalog (Final Edition) 55 HP Elec. pg. 21
Part # 318841 Propeller Thrust Bushing should be changed to Part # 320305.
Correction to 1978 Parts Catalog (Final Edition) 2 HP pg. 2
Part # 313803 Screw, bracket to carburetor should be changed to Part # 320504.
NOTE: Post V-6 index under heading “Carburetion.”
CR 78-63
Johnson Outboards

D.J. Leinonen
Technical Data Coordinator

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires & Rebuild Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 324906

Search for original or compatible replacement part 324906. Check the bulletin for supersessions and model fit.

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.