SPB-472 - V-6 Spark Tester Model CM-76

Issued in February 1976, this Johnson Service Promotion Bulletin describes the CM-76 spark tester for 1½ to 200 horsepower outboards, along with the smaller CM-75 tester, original dealer prices, and ordering instructions.

Johnson Outboards Service Promotion letterhead
SPB-#472

February, 1976

SUBJECT:  V-6 Spark Tester Model CM-76

Now available is the ideal spark tester that can be used on all models
1½ - 200 h.p.

Factory photograph of CM-76 V-6 spark tester with multiple ignition leads

The leads are internally mounted on a 3½ X 4 X ½ piece of black plastic, including the lead to the center ground plate. The plug-in type of connectors are one piece aluminum covered with shrink tube. It has an aluminum strap on the back to be used for mounting on the upper center part of the exhaust cover of the V-6. There are three reference lines scribed on the front which are 1/4", 3/8" and 1/2 inch from the points on the center plate. There is an alligator clip mounted on the top and back side to be used for hanging purposes on other engines. This Spark Tester is Model CM-75.

Price of the CM-76 ........................ $19.50 DEALER NET

The CM-75 Spark Tester for V-4 and smaller models is still available at $14.50 DEALER NET.

DO NOT ORDER FROM JOHNSON OUTBOARDS.

ORDER FROM:  CM Products
          P.O. Box 181
          Ludlow, Kentucky 41016

JOHNSON OUTBOARDS

D. J. Leinonen

Technical Data Coordinator

DJL/kr

NOTE:  Post on your Service Promotion Bulletin index under heading
       "Test Equipment."

Historical notes

Factory spark-testing equipment: CM-76 for V-6 applications, listed at $19.50 dealer net; CM-75 for V-4 and smaller engines, listed at $14.50 dealer net. These are original 1976 prices.

1970-1980 Johnson Service Bulletin Index

Related factory bulletin: SPB-468, CM-75 spark tester (URL not verified).