OMC Service Bulletin No. 2067 - Mixed Carburetors

February 1983 comparison of first and updated carburetor versions on CT V4 outboards.

OMC Outboard Service Bulletin
Fuel System

No. 2067
February, 1983

Subject:Mixed Carburetors
Models:CT V4 Outboards

During production of the first CT V4 models, the carburetors were changed to an updated version. While the change was taking place a few motors were equipped with one first version and one updated version carburetor.

The difference between the two versions appears on the sides of the carburetor float bowl. The first version (see ①) has two orifice screw plugs Ⓐ positioned one above the other. The updated version (see ②) has a single orifice screw plug Ⓑ.

Performance of the motors is not affected by combining the two versions on a motor because the air and fuel metering is the same in both carburetors.

Should it become necessary to replace parts on the carburetors, the CN V4 parts catalog can be used for the first version and the CT V4 parts catalog can be used for the updated version.

First version carburetor with two orifice screw plugsUpdated carburetor with single orifice screw plug

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.