OMC Service Bulletin No. 2093: Revised Maximum Spark Advance Setting

December 1983 OMC ignition bulletin explaining the correct maximum spark advance decal for 235 CTS models and distinguishing the 235 CTD setting.

OMC Outboard Service Bulletin
Ignition System
No. 2093
December, 1983
Subject:Revised Maximum Spark Advance Setting
Models:235 CTS Models
Problem:Decal on the spark advance lever may indicate wrong maximum spark advance
Cause:Some 235 CTS models were built with the wrong decal indicating 32 degrees BTDC.
Solution:When servicing 235 CTS models, check the maximum spark advance decal for the correct 30 degrees BTDC setting. Check the maximum spark advance setting of the engine as described in the service manual.

If the motor has the wrong decal, cross out the 32 degree reading and print "30 degrees" on the spark advance lever. This can be done by cleaning the lever thoroughly and using a permanent ink, felt-tip pen.

The correct maximum Spark Advance Decal P/N 325341 is available from:

Outboard Marine Corporation
Product Warranty Department
3145 Central Ave.
Waukegan, IL   60085

IMPORTANT - Maximum spark advance for 235 CTD models remains at 32 degrees BTDC.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Adhesive / Decal Remover Solution

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 325341

Search for original or compatible replacement part 325341

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.