
Subject:
Trim/Tilt Gauge
Models:
Johnson® and Evinrude® Outboards, OMC Sea Drive® and OMC® Stern Drive Models
Problem:
No trim angle registration, erratic reading of a new trim gauge.
Cause:
The trim gauge is not compatible with the sending unit installed.
Solution:
Replace the trim gauge or sending unit with one of the following:
| Outboards | |
|---|---|
For integral trim/tilt models which have the pump and cylinders mounted between the stern brackets order:
| For trim/tilt models which have the pump and cylinders mounted outside the stern brackets order:
|
| OMC Sea Drive Models | |
|---|---|
| Ducted Models | S–Type Models |
|
|
| OMC Stern Drive | |
|---|---|
For 2.5 and 3.0 Litre Models order:
| For 3.8, 5.0 and 5.7 Litre Models order:
|