February 1985 OMC safety bulletin on motor mounting hardware for CO 120/140 outboards.

OMC Outboard Service Bulletin
Shop Information
No. 2143
February, 1985
⚠ Safety Warning
Subject:Motor Mounting Hardware
Models:CO 120/140

These 120/140 models use the same mounting hardware as V-6 models. Some early models were shipped without the two 4-1/2 in. long bolts Ⓐ P/N 326614, and two support plates Ⓑ P/N 321735.

These support plates help disperse potentially damaging shock forces which the motor can receive from underwater impacts. If the support plates are absent, there is an increased risk of damaging the motor’s stern brackets should the operator strike an underwater object at high speed. If the object which is struck at a high speed is of an immovable nature, there is also a risk of the motor coming into the boat.

All registered owners of these motors were notified to return their motor for a dealer inspection of the mounting hardware.

Dealers who received these motors were notified by letter and provided the correct parts. They were instructed to contact customers to return their boat for installation of the correct hardware.

We recommend that any 120/140 motor you sell or that comes in for service be inspected for the correct hardware.

Contact OMC Product Warranty for parts and instructions.

Factory illustration 1
CR85-13

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Outboard Transom Support Plate

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 326614

Search for original or compatible replacement part 326614

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.