OMC March 1986 fuel and oil mixture requirements for commercial, rental, and extended heavy-duty outboard service.

OMC Outboard Service Bulletin
Fuel System
No. 2162
March, 1986
Subject:Revised Fuel/Oil Mixture Requirements for Commercial Usage or Extended Heavy-Duty ServiceModels:Recreational Models Approved for 100:1 (1% Oil) Fuel/Oil Ratio

The fuel/oil ratio for recreational models must be increased to 50:1 (2% oil) when used in any commercial, rental or extended heavy-duty service. The additional oiling is required to provide added protection against wear and corrosion of internal engine parts.

Outboards equipped with the AutoBlend™ feature - A 100:1 (1% oil) fuel/oil mixture must be used in the gasoline reservoir in addition to the oil supplied from the AutoBlend system for a 50:1 (2% oil) fuel/oil mixture.

Note The AutoBlend system is designed specifically for use with lubricants (oil) which are Boating Industry Association (BIA) certified for service TC-W (Two Cycle-Water Cooled). Use ONLY the recommended lubricant in the oil reservoir to ensure proper operation. See inside front cover of the Owner's Manual for recommended lubricant.

If the AutoBlend tank is replaced with an OMC® Accessory fuel tank, this will require the use of a 50:1 (2% oil) fuel/oil mixture.

CR86-21

Related products

Two-cycle marine oil - recommendations coming soon.