
Problem: The following shims and thrust washer used with the forward gear in some of the above models are no longer used or available:
- thrust washer - 0.103 in. (2,61 mm) thick
- shims - 0.015 to 0.029 in. (0,38 to 0,74 mm) thick
Solutions:
When servicing the gearcase on any of the above models and the original forward gear will be reinstalled:
- Reuse the original thrust washer and shim, if present and undamaged.
- If the thrust washer and shim are damaged and they measure 0.123 to 0.127 in. (3,12 to 3,23 mm), they must be replaced by thrust washer P/N 327669.
- If thrust washer and shim are damaged and do not measure 0.123 to 0.127 in. (3,12 to 3,23 mm), the original forward gear MUST NOT be used; a new forward gear and thrust washer P/N 327669 must be installed.
When servicing the gearcase on any of the above models and a new forward gear will be installed:
- If the original thrust washer and shim, if present, measure 0.123 to 0.127 in. (3,12 mm to 3,23 mm) thick and are undamaged, they may be reused.
- If the original thrust washer and/or shim are damaged or do not measure 0.123 to 0.127 in. (3,12 to 3,23 mm), they must be replaced by thrust washer P/N 327669.
Note Do not use any shims if thrust washer P/N 327669 is installed. Using a shim with this thrust washer will cause damage to the gear set.
Note Do not use a 0.103 in. (2,612 mm) washer without its original shim. Using this thrust washer without its original shim will cause damage to the gear set.