OMC Service Bulletin No. 2175: Optional High Speed Orifices

1986 OMC fuel system bulletin listing optional high-speed orifices and factory part numbers for KT 10S and RT 10S racing motors.

OMC Outboard Service Bulletin
Fuel System
No. 2175
September, 1986
Subject:Optional High Speed OrificesModels:KT 10S and RT 10S

The following optional orifices are available for the Class “A” and 45ss racing motors.

Class “A” Models
SizeStamped NumberPart Number
.05252328528
.05454322293
.05858320820
.06060319781
45ss Models
SizeStamped NumberPart Number
.05252D321108
.05454D321407
.05858D328543
.06060D332204
NoteDo not modify orifices. Drilling an orifice oversize does not provide the same fuel flow as a factory made orifice. Drilling orifices could cause powerhead damage due to a lean fuel mixture.
CR86-74

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.