OMC Service Bulletin No. 2201 - Fast, Erratic Idle

February 1988 OMC bulletin on fast, erratic idle in early CC 120 and 140 outboards, including spark advance rod and adjustment stop inspection.

OMC Outboard Service Bulletin
Fuel System
No. 2201
February, 1988
Subject:
Fast, Erratic Idle
Model:
Early CC, 120 and 140
Problem:
On early models, the spark advance rod and adjustment stop may not allow the carburetor throttle plates to close completely.
Solution:
1
Loosen knurled locknut Ⓐ and remove adjustment housing Ⓑ.
2
Remove the adjustment stop Ⓒ and check the inside diameter hole with a ⁹⁄₃₂ inch drill shank. If the diameter is less than ⁹⁄₃₂ inch replace the adjustment stop with a new one, P/N 334311.
3
File a 45° chamfer Ⓓ to end of spark advance rod and reinstall the adjustment housing. Refer to your OMC Service Manual for all synchronization and linkage adjustments.

Fill out a warranty claim and submit to the OMC Warranty Department for 0.5 hour of labor.

Factory figure 1Factory figure 2Factory figure 3

Related marine products

eBay: OMC / Evinrude part 334311

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.