OMC Service Bulletin No. 2207: Anti-Fouling Bottom Paint

Recommendations for anti-fouling bottom paint and corrosion precautions for boats using OMC outboards.

OMC Outboard Service Bulletin
Shop Information
No. 2207
July, 1988
Subject:Anti-Fouling Bottom Paint
Models:All

A boat’s performance is affected by the condition of its bottom. If the bottom is covered by marine growth the boat’s speed and range will be reduced. How often the bottom must be cleaned depends on the type of water in which it is used.

If a boat is in water where marine growth is a problem, the use of an anti-fouling paint will reduce the rate of growth and the frequency of cleaning. OMC recommendations are as follows:

NoteNever use copper base anti-fouling paint on the part of the transom surface on which the unit is mounted. Never paint UP TO and TOUCH the unit with copper base paint. NEVER PAINT THE UNIT with copper base paint. ANY CONTACT OF THE UNIT WITH COPPER BASE ANTI-FOULING PAINT WILL CAUSE ACCELERATED GALVANIC CORROSION.

NoteNever put ANY kind of paint on the anti-corrosion anodes or their effectiveness will be lost.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Aluminum-Safe Marine Anti-Fouling Bottom Paint

Search for these supplies on Amazon

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.