November 1989 OMC service information explaining POZIDRIV screw recesses, correct drivers, and applications.

POZIDRIV® screws have been used in the auto industry for several years. When used with a POZIDRIV driver, this feature helps prevent “cam out” that could cause the driver to slip.
1The POZIDRIV screw recess Ⓐ and driver Ⓑ resembles the *PHILLIPS® screw recess Ⓒ and driver Ⓓ. The POZIDRIV driver has four additional ribs Ⓔ that engage in slots Ⓕ in the screw head recess. The slots or four marks on the screw head identify a POZIDRIV screw, which requires use of a POZIDRIV driver.

NoteDO NOT use PHILLIPS, or Reed and Prince drivers on POZIDRIV screws. Permanent damage to screw head could occur.
*POZIDRIV® and PHILLIPS® are registered trademarks of the Phillips Screw Company
(Continued)
POZIDRIV screws will be used in many applications on future models. They have been introduced as a running change to replace Phillips and slotted-head screws.
Use a No. 3 POZIDRIV driver on all integral trim/tilt pump reservoir mounting screws.
A No. 2 POZIDRIV driver could be required in the following locations:
POZIDRIV drivers are available from your local hand tool supplier. Some POZIDRIV screwdrivers are identified by a special color handle, or are marked “PZ”.
HELPFUL HINT: A POZIDRIV driver can be identified by locating the ribs with your fingernail.
Suggested products related to this service bulletin. Verify fit and suitability before ordering.
Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.