February 1990 OMC guidance on fuel, alcohol blends, additives, TC-W II oil and break-in fuel/oil ratios.
OMC Outboard Service Bulletin
Miscellaneous

No. 2219
February, 1990

Subject:Specifications for Fuel, Additives, Oil, and Engine Break-inModels:CU and Newer

Make sure you are up to date on the current fuel and engine break-in specifications.

Fuel

Use automotive fuel that meets or exceeds the octane specified in Service Manual:

The use of premium grade fuels is specifically encouraged. Most national brand premium fuels contain detergent and dispersant ingredients advertised to reduce intake valve and fuel injector deposits. These ingredients also remove and prevent carbon buildup on pistons and rings. These ingredients can extend engine life while maintaining a high level of performance.

You may use gasoline extended with alcohol, but:

⚠ Using alcohol-extended fuel requires more frequent inspection of all fuel system parts for signs of deterioration or leakage - fuel leaks MUST be found and repaired before they cause fire.

Additives

OMC 2+4® fuel conditioner is the only gasoline additive recommended by OMC. Other products added to gasoline can result in poor performance or even engine damage.

Printed in USACR90-14

OIL

Oil certified TC-W II:

Using only TC-W II certified oil and recommending its use to your customers is the best protection you can offer for the outboards you sell and service.

Break-in

To help ensure long engine life and prevent serious engine damage, using additional oil in the fuel is mandatory during the first few hours of operation of:

Refer to engine’s Owner’s Manual or Service Manual for time and RPM specifications for break-in.

ModelFuel/Oil RatioPeriod of Use
Colt®/Junior® thru 8SRL25:15 hours
9.9 thru 55 with Fuel Pump25:112 gallons of fuel
40 thru 50 VRO²®50:1 in fuel tank IN ADDITION TO operation of VRO²® system for the first 12 gallons of fuel used*

VRO²® system disconnected - 25:1 in fuel tank for the first 12 gallons of fuel used

60 thru V6 with Fuel Pump25:110 hours
60 thru V8 VRO²®50:1 in fuel tank IN ADDITION TO operation of VRO²® system for the first 10 hours of operation*

VRO²® system disconnected - 25:1 in fuel tank for the first 10 hours of operation

* Before switching to clear gasoline in the fuel tank, you MUST be sure the VRO²® system works. Check to see that the level of oil in the reservoir is lower than at the start of the break-in period.

Printed in USACR90-14