OMC Service Bulletin No. 2220 Rev. 2 - Intake Manifold Gasket Modification

February 1993 OMC bulletin covering the intake manifold gasket modification for 1972 and 1973 50 HP outboards.

OMC Outboard Service Bulletin
Powerhead
No. 2220 Rev. 2
February, 1993
Subject:
Intake Manifold Gasket Modification
Models:
1972 & 1973 50 HP Models
Problem:
Early gasket, P/N 317504, is replaced by gasket P/N 335633. P/N 335633 does not have hole Ⓐ, which allows the operation of the 1972 & 1973 “remote drive” fuel pump.
Cause:
Earlier gasket, P/N 317504, had a hole which would collapse into crankcase and cause a leak under the leaf plate on 1974 and newer models.
Solution:
Use attached template to locate hole Ⓐ and punch ⁵⁄₁₆” diameter in current gasket, P/N 335633, if using on a 1972 or 1973 50 model.
Factory intake manifold gasket template identifying hole A
CR90-11

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Fuel Line Assembly (3/8" Primer Bulb)

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 317504

Search for original or compatible replacement part 317504

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.