OMC Service Bulletin No. 2227 - Erratic Idle, Hard Starting

Replacement idle lift tube guidance for 1987 and newer 5 through 15 HP engines.

OMC Outboard Service Bulletin
Fuel System
No. 2227
July, 1990
Subject:
Erratic Idle, Hard Starting
Models:
5 thru 15 - 1987 and Newer
Problem:

Motor exhibits idling problems and is hard to start. Carburetor is not sensitive to adjustments of the idle mixture needle.

Solution:

Inspect entire fuel system for proper operation. If fuel system is satisfactory, remove carburetor and disassemble following service manual procedure. Inspect the idle lift tube Ⓐ. It should not be hard, loose, deteriorated or contaminated with foreign material. Regardless of the original idle lift tube’s appearance, replace with P/N 336567 to prevent problems in the future.

Identify the original and new idle lift tubes:

  • Original tube is clear, white or black with an outside diameter of ⅛ in. (3 mm).
  • New tube P/N 336567 is black with an outside diameter of ⁵⁄₃₂ in. (4 mm).
Carburetor idle lift tube A
CR90-34

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Carburetor Cleaner Spray, Jet Cleaning Wires

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 336567

Search for original or compatible replacement part 336567

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.