OMC Service Bulletin No. 2265: Power Pack Color Coding

December 1992 ignition bulletin for early 1993 (ET) 20 through 40 HP rope-start models, clarifying the orange/blue power-pack primary wire connection.

OMC Outboard Service Bulletin
Ignition

No. 2265
December, 1992

Subject:Power Pack Color Coding
Models:Early 1993 (ET) 20 thru 30, 40 Rope
Problem:
These models have the power pack orange/blue primary wire attached to “NO. 2” ignition coil. This is contrary to the wiring diagrams and information in the OMC Service Manual.
Solution:
If the engine performs satisfactorily, DO NOT SWITCH IGNITION COIL PRIMARY WIRES.

If the engine does not perform satisfactorily, and you suspect an ignition problem, verify wire location as outlined in “Indexing Flywheel, Erratic Ignition” before you perform the IGNITION OUTPUT TEST.

Note The service replacement power packs are not affected. They include a tag informing you to attach the orange/blue wire to “NO. 1” ignition coil, disregarding the original wire routing.