OMC Service Bulletin No. 2290: False Overheat Signals

This March 1995 bulletin documents false overheating warnings in early-production 40-50 HP engines and revised temperature-switch specifications.

OMC Outboard Service Bulletin
Powerhead
No. 2290
March, 1995
Subject:
False Overheat Signals
Models:
Early 1995 (EO) 40-50
Problem:

Your customers might experience false indications of engine overheating, including activation of the S.L.O.W.™ warning system, at cruising speeds less than full throttle.

Early production 40-50 engines were built with 203° F (95° C) temperature switches. Later production engines were built with 237° F (114° C) temperature switches.

Solution:

Make routine checks of all cooling system components, including the thermostat assembly. Check the engine’s operating temperature following the procedure in your OMC service manual.

If all your test results are normal, replace the original temperature switch with the later 237° F (114° C) switch. Also replace the thermostat assembly spring with spring, P/N 342421, which is color-coded red.

Switch Identification

Part No.TemperatureColor
584592203° F (95° C)Tan
584589237° F (114° C)Tan/Blue

Related marine products

eBay: OMC / Evinrude part 342421

Listings matching the part number

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.