OMC Outboard Service Bulletin No. 2300

Issued in November 1995, this bulletin explains the longer oil pickup assembly required when using OMC System Check adapter kit P/N 176345 with a 3.0 gallon oil tank on a boat receiving a 1996 or newer outboard.

OMC Outboard Service Bulletin
Accessories
No. 2300
November, 1995
Subject:OMC System Check™ Adapter Kit, P/N 176345
Models:1996 (ED) and Newer
Problem:
1This kit provides the OMC System Check™ engine monitoring system when you are installing a 1996 or newer outboard on a boat equipped with a RED harness connector. This kit includes a new oil pickup assembly A for a 1.8 gallon tank. The pickup assembly is too short to be used in a 3.0 gallon tank.
Factory figure 1 comparing oil pickup assemblies A and B, including complete rectangular border
Solution:
1When installing this kit in a boat equipped with a 3.0 gallon oil tank, oil pickup assembly, P/N 176366, B must be installed. This pickup assembly is longer and will allow full use of the 3.0 gallon oil tank's capacity.
If you have installed one of these adapter kits in a boat equipped with a 3.0 gallon oil tank, the oil pickup assembly must be replaced with P/N 176366.
Submit a warranty claim along with the 1.8 gallon oil pickup assembly to the OMC Warranty Department. Use the following information on the warranty claim:
•  Flat Rate Code: L
•  Flat Rate Time: 1.0 Hour
•  Failing Part: 9999910

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

eBay: OMC / Evinrude OEM part 176345

Search for original or compatible replacement part 176345

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.