OMC Service Bulletin No. 2302 - Connecting Rod Screw Torque

Corrected connecting rod screw torque for 1996 25/35 three-cylinder outboards.

OMC Outboard Service Bulletin
Powerhead
No. 2302
February, 1996

Subject: Connecting Rod Screw Torque

Models: All 25/35 3-Cylinder

Problem: The final torque for the connecting rod screws of 30-32 ft. lbs. (40-43 N·m) listed in the Powerhead Section of your 1996 OMC Service Manual, P/N 507123, is incorrect.

Solution: The correct final torque of the connecting rod screws is 170-190 in. lbs. (19-21 N·m). Please change this information on pages 4-3 and 4-24 of your service manual.

1 When installing the connecting rods, be sure to follow the procedure outlined on page 4-24 and apply a final torque of 170-190 in. lbs. (19-21 N·m) to the screws.

Factory illustration 1

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Cylinder Hone Tool, Piston Ring Compressor

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 507123

Search for original or compatible replacement part 507123

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.