New cylinder head screws for late-production 1999 60-degree V4 and V6 outboards.

OMC Technical Service Outboard Bulletin
Powerhead
No. 2350
September, 1999

Subject: Cylinder Head Screws

Models: All 1999 (EE) and Newer 60° V4 & V6

1 Late model production of all 1999 (EE) 60° V4 and V6 FFI™ and carbureted models have new cylinder head screws. These screws can be identified by the washer style hex head (A) versus the standard hex head (B).

Applying OMC Gasket Sealing Compound to the threads and a lower torque value of 14-16 ft. lbs. (19-21.5 N·m) is required for the washer style hex head screws.

Torque for the standard hex head screw remains at 20-22 ft. lbs. (27-30 N·m).

Note Do not intermix the two different style cylinder head screws on the same cylinder.

Factory illustration 1