Fuel cooler kit guidance for hot-restart problems on 1997 and 1998 60-degree V6 FFI engines.

OMC Technical Service Outboard Bulletin
Fuel System
No. 2351
September, 1999

Subject: Hard Starting

Models: 1997 (EU) and 1998 (EC) 60° V6 FFI™

Problem: The engine is hard to restart when operating in hot temperatures. This condition could be caused by vaporization of fuel within the fuel system.

Solution: 1 Verify that the fuel system and cooling system are properly operating following the procedures in your OMC® Service Manual. If the hard starting condition still exists, install a Fuel Cooler Kit, P/N 5000589. This will reduce the temperature of returning fuel and reduce fuel vaporization problems.

2 The fuel cooler/cover replaces the original vapor separator cover.

3 The return fuel hose is cut and connected to the cooler fittings.

Obtain the Fuel Cooling kit from your OMC Genuine Parts distributor.

Factory illustration 1Factory illustration 2Factory illustration 3

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Marine Water Pump Impeller Kit

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 5000589

Search for original or compatible replacement part 5000589

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.