OMC Service Bulletin 2358: Connecting Rod Cap Screw Torque

March 2000 OMC bulletin specifying connecting rod cap screw torque values and torque sockets for 1999 and 2000 90-degree V6 models.

OMC Technical Service Bulletin
Powerhead

No. 2358
March, 2000

Subject:Connecting Rod Cap Screw Torque
Model:90° V6 1999 (EE) & 2000 (SS)
Problem:Due to different size rod cap screws, 5/16 in. and 3/8 in., a possibility of incorrect torque application exists.
Solution:Check screw size and tighten to correct final torque:

• 5/16 in.: 42 - 44 ft. lbs. (57 - 60 N·m)
Use OMC Torque Socket P/N 331638

• 3/8 in.: 58 - 62 ft. lbs. (78 - 84 N·m)
Use OMC Torque Socket P/N 346187

Note: Follow steps as outlined in the Powerhead Section of the OMC Service Manual for complete procedure.

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

3/8" Drive Click Torque Wrench (Inch-Pounds)

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 331638

Search for original or compatible replacement part 331638

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.