OMC Service Bulletin No. 2368

June 2000 OMC bulletin on preventing fuel supply tube interference during installation of the starboard lower motor cover on 2000 135, 150, and 175 FFI outboards.

OMC Technical Service Bulletin
ROUTE TO: □ SERVICE MANAGER   □ SERVICE WRITER   □ TECHNICIAN 1   □ TECHNICIAN 2   □ TECHNICIAN 3   □ FILE
Powerhead

No. 2368
June, 2000

Subject:Lower Motor Cover InstallationModels:2000(SS) 135, 150, 175 FFI™Problem:

A fuel restriction could be created with the fuel supply tube assembly, P/N 5000202, if the installer is careless during the installation of the starboard lower motor cover. A fuel supply restriction could cause powerhead damage.

Solution:

During installation, carefully place the starboard lower motor cover in the exhaust grommet and over the rubber bushings on the powerhead. Visually check to make certain there is no interference created between any hoses, wires, or linkage.

Factory photograph of lower motor cover installation

Tools, supplies and related parts

Suggested products related to this service bulletin. Verify fit and suitability before ordering.

Amazon: tools and supplies

Permatex Aviation Form-A-Gasket Sealant

Search for these supplies on Amazon

eBay: OMC / Evinrude OEM part 5000202

Search for original or compatible replacement part 5000202

Click here to search on eBay

Affiliate disclosure: EverythingOutboards may earn a commission from qualifying purchases. As an Amazon Associate, we earn from qualifying purchases.