Johnson Service Bulletin SB-1065 - Spark Plug Heli-Coil Inserts

Issued September 1965, this Johnson Motors bulletin identifies incorrectly sized replacement spark plug thread inserts, corrects a published package price, and explains how dealers should order part 380643.

Johnson Motors Service Bulletin letterhead

September, 1965

SUBJECT:  SPARK PLUG HELI-COIL INSERTS - PART NO. 380643

MODELS:   ALL MODELS

We have been advised that some of the Heli-coil insert packages (Part No. 380643) shipped to our dealers were of the wrong length. As you know, our outboard and two-cycle stern drive engines use 3/8" reach spark plugs while some of the early 380643 Heli-coil packages shipped were for 1/2" reach spark plugs. The longer Heli-coils are easily identified since they have approximately 5-7/8 turns while the 3/8" reach inserts have only 3-5/8 turns. If you should be in receipt of any of the 1/2" reach inserts, they should be cut to the shorter length prior to being used.

We would also like to advise you that the price of a package of Heli-coil inserts, as shown in Service Bulletin #1033 and in the order blank of Special Tool Catalog No. 165, is incorrect. The price listed is $18.00 net for a package of twenty inserts. This price should be $18.00 List, subject to standard parts discount.

Heli-coil inserts are available from your Parts Distributor. Do not order directly from OMC Parts Depot. Incidentally, when ordering a package of twenty inserts, order 1 - #380643 only. DO NOT ORDER 20 - #380643.

JOHNSON MOTORS
N. Peter Hansen
Administrative Assistant

NOTE:  Post on your Miscellaneous Index under the heading of "Tools."

NPH:rs

Historical reference

SB-1065 corrects the pricing information printed in SB-1033. Factory part number: 380643. The original bulletin specifies one package containing twenty inserts, not twenty packages.