Johnson Service Bulletin SB-1098 - Drive Pin Chart

Issued June 1966, this bulletin identifies propeller drive pins by part number and motor application. The original factory pin profiles are reproduced beside searchable model listings.

Johnson Motors Service Bulletin letterhead
June, 1966
SUBJECT:  DRIVE PIN CHART

ON MODELS:  UP TO 1966

This chart has been prepared to give you a quick reference for identifying Drive Pins.

The drawings are actual size.  If you doubt the pin in question is correct for a particular motor, simply place the pin on the profile applicable to that motor.  If it fits, it's the size you want.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant
CK:rm

Post on all indexes under the heading "Lower Unit."
PAGE 2   SERVICE BULLETIN SB-1098
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085

Drive Pin Chart

Original factory drive pin size silhouettes, page 2
Part No.Models Used On
15-102OK & K Series
19-102TR-40, P-50 thru 80, V-45 thru 70, PO-37 thru 15
43-72HA, HD, HS, MD & MS
203230JH-19 thru 21, JW-10 thru 21
203663FD, FDE-10 thru 12, FD-13, QD-10 thru 20
QD-10 thru 17B equipped with useable original equipment propeller, Part No. 375605 (no longer available) require Drive Pin #301923.
300592TS & TD-15, 20
302333AD-10 thru 12, CD-10 thru 22, TN-25 thru 28
304575RD-10 thru 28, RDE-16 thru 19, RJE-18, 19, RDS-20 thru 28, RK-24 thru 28, RX-10 thru 14, RXE-13, 14
RD-10 thru 18E, RDE-16 thru 18E and RJE-18 & 18E equipped with useable original equipment propeller, part #375790 (no longer available) require Drive Pin #302566.
PAGE 3   SERVICE BULLETIN SB-1098
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085

Drive Pin Chart (continued)

Original factory drive pin size silhouettes, page 3
Part No.Models Used On
301923See 203663
302566See 304575
305500V4, V4S-10 thru 11, V4H-16 & 17, VXH-10 thru 12
307217V4M-10 thru 11, V4A-13 thru 18, V4S-12 thru 18, VX-10 thru 12, CU-12M, 13E, 14D (LD), DU-10S thru 13E
307949CD-23, FD-14 thru 20, MQ-10 thru 12, QD-21 thru 24
309954V4M-10 thru 11, V4A-13 thru 18, V4S-12 thru 18, VX-10 thru 12, DU-10S thru 13E, CU-12M, 13E, 14D (LD)
This drive pin to be used with 10 x 9¼, small hub propeller #379260.
310956V4ML-12, CU-14D(HD), SU-12M,13E, HU-12M, 13E, 13EM, 14D, TU-14D
311211LD-10, 11

Related service information

See SB-1005 - Propeller Pin Usage, 10 H.P. Motors for the distinction between brass shear pins and stainless steel drive pins.

Historical note: The factory drawings were intended as actual-size references on printed paper. Browser zoom, screen scaling, and printer settings can change their physical dimensions. Do not rely on an on-screen measurement as a 1:1 gauge.