Johnson Service Bulletin SB-1106 Rev. 1 - Tank Testing the 1967 40 H.P. Motors

Issued in November 1966, this revised Johnson bulletin specifies test-tank cooling precautions for 1967 RD and RDS-29 40 H.P. outboards. It also identifies the Tempo Products test-tank adapter, part 382107.

Johnson Motors Service Bulletin factory letterhead

SB-1106 Rev. 1

November, 1966

SUBJECT:   TANK TESTING THE 1967 - 40 H.P. MOTORS

ON MODELS:   RD and RDS-29 - 40 H.P.

Whenever running one of the subject motors in a test tank for any purpose, strict adherence to the following is necessary to avoid overheating:

  1. Install a test tank adaptor to the water intake.  (Fig. 1)
  2. Regulate the water line pressure to the adaptor to 3 to 5 P.S.I.
  3. Maintain test tank water level to within 11 inches of the top face of the test tank mounting bracket.  (Fig. 2)
Figure 1: test tank adapter attached to engine water intake
Figure 1
Figure 2: diagram of maximum 11-inch water level distance
Figure 2

The adaptor used in the above illustration is manufactured by Tempo Products and will be listed in our next Special Tool Catalog under part number 382107.  This is a net item at $3.50 each F.O.B. destination.  Order your test tank adaptor from:

Outboard Marine Corporation
Galesburg, Illinois

PAGE   2 SERVICE BULLETIN   SB-1106 Rev.1
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085

Full remittance must accompany your order - sorry, no C.O.D. or open account orders can be accepted.  Make check or money order payable to:  Outboard Marine Corporation.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant

CK:rs

NOTE:  Post on your RD, RDS-40 H.P. Index under the heading "Miscellaneous".  Destroy SB-1106 dated September 12, 1966.

Historical references

Special tool 382107: Tempo Products test-tank adapter for the water intake, listed at $3.50 in this November 1966 bulletin. The tool is distinct from the engine's normal water-intake components.

Revision: SB-1106 Rev. 1 replaces the original SB-1106 dated September 12, 1966. The factory directed dealers to destroy the earlier issue.