Johnson SB-1106 - Tank Testing the 1967 40 H.P. Motors

Issued September 12, 1966, this bulletin explains test-tank precautions for RD and RDS-29 motors and includes a Johnson recommended test-wheel performance chart.

Johnson Motors Service Bulletin gray factory letterhead

September 12, 1966 SB #1106

SUBJECT:  TANK TESTING THE 1967-40 H.P. MOTORS

ON MODELS:  RD and RDS-29 - 40 H.P.

Whenever running one of the subject motors in a test tank for any purpose, strict adherence to the following is necessary to avoid overheating:

  1. Install a test tank adaptor to the water intake. (Fig. 1)
  2. Regulate the water line pressure to the adaptor to 3 to 5 P.S.I.
  3. Maintain test tank water level to within 13 inches of the top face of the test tank mounting bracket. (Fig. 2)
Figure 1: test tank adaptor installed at water intake
Figure 1
Figure 2: test tank water level within 13 inches of mounting bracket
Figure 2

The adaptor used in the above illustration is manufactured by Tempo Products and will be listed in our Special Tool catalog under part number 382107. It is available through our Parts Depot at Galesburg, Illinois. This is a net item at $3.50 each and must be prepaid.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant

NOTE:  Post on your RD and RDS-40 H.P. Indexes under the heading "Miscellaneous".

PAGE 2      SERVICE BULLETIN SB-1106
JOHNSON MOTORS, DIVISION OF OUTBOARD MARINE CORPORATION, WAUKEGAN, ILLINOIS 60085

TEST WHEEL
PERFORMANCE CHART

(Johnson Recommended Test Wheel)

Factory illustration of Johnson test wheel
ModelHorsepowerDesired Minimum RPM
JW3 H.P.3850
CD5½ H.P.4000
AD7½ H.P.4200
QD10 H.P.4050
FD18 H.P.4500
RD25 H.P.4400
RX28 H.P.4400
RD30 H.P.4500
RD35 H.P.4500
RD40 H.P.4400
V-450 H.P.4400
V-475 H.P.4400

ABOVE BASED ON MOTOR OPERATION IN A TEST TANK 60" × 60" × 40" FILLED TO APPROXIMATELY 565 GAL. WATER CAPACITY - 600 FT. ELEVATION

JOHNSON MOTORS - WAUKEGAN, ILL.

Historical references

Special tool #382107 - Tempo Products test tank adaptor, originally listed at $3.50 prepaid. The chart's minimum RPM figures are reproduced for historical reference, not as modern engine specifications.