Johnson Service Bulletin SB-1121 - Torque Tension Chart for 1967 Engines

Issued March 1967. Factory tightening guidance and original torque specifications for Johnson outboard engines. The original technical tables are reproduced as full-page images to preserve the printed figures.

Johnson Motors Service Bulletin letterhead

March, 1967

SUBJECT:  Torque Tension Chart for 1967 Engines . . . Screws, Nuts
         and Bolts

Proper torque tension on screws, nuts and bolts is extremely important when servicing Johnson outboard engines. Over-torquing can warp castings and create a friction bind or a water leak in an engine. Over-torquing may also result in stripped threads which increases labor costs when having to drill, re-tap and install a heli-coil.

Screws left loose are apt to back out. Internally, such screws will cause extensive damage to the powerhead and/or gearcase. Externally, loose screws invite leakage at gaskets or between crankcase halves, etc.

Needless to say, the only certain and recommended method of properly tightening screws is by using a torque wrench. These wrenches are readily available and may be purchased at reasonable costs from local parts houses, tool jobbers and mail order houses. They will rapidly pay for themselves in expert workmanship.

Factory Figure 1: numbered tightening sequence for cylinder head or manifold

When torquing surfaces such as cylinder heads, exhaust covers, intake manifolds, etc., always follow the recommended sequence illustrated in Figure 1. Start at the middle and work evenly towards each end in a circular motion.

SB-1121 factory torque chart, scanned page 2 SB-1121 factory torque chart, scanned page 3 SB-1121 general torque values, scanned page 4

Historical reference

Johnson SB-1121 provides factory torque guidance for 1967 outboards, including 3 HP JW and JH, 5 HP LD, 6 HP CD, 9½ HP MQ, 20 HP FD, 33 HP RX, 40 HP RD/RDS/RK, 60 HP VX/VXH, 80 HP V4S/V4A, and 100 HP V4TL engines. The original charts and their notes above are the authoritative reference for torque values.

Related: SB-1076 - Torque Tension Chart for 1966 Engines.