Johnson Service Bulletin SB-1129: Power Tilt Installation on 100 HP Outboard Motors

Issued May 1967, this bulletin revises the reverse locking lever used with accessory power tilt on 1966 and 1967 Johnson 100 HP outboards. It follows the earlier guidance in SB-1109.

Johnson Motors Service Bulletin factory letterhead

May, 1967

SUBJECT:  POWER TILT INSTALLATION ON 100 H.P. OUTBOARD MOTORS

ON MODELS:  100 H.P. - 1966 and 1967

In Service Bulletin SB-#1109 you were advised of a new Reverse Lock Link required for satisfactory relatching of the reverse lock mechanism when used in conjunction with the accessory power tilt. This link, P/N 381991, did not serve its purpose in all applications, necessitating the redesign of #307265 Locking Lever to its present form and part number which is #313671. (See illustration.)

By using the new P/N 313671 Locking Lever, the P/N 305635 Reverse Lock Link, which is a part of the engine, should be used. Part number 313671 with the additional stock in the contact area now provides sufficient ramp to smoothly glide over the thrust rod. The new Locking Lever is presently being used on 100 H.P. production motors and will also be placed in the Power Tilt kits.

Factory comparison of new locking lever 313671 and old-style contour of 307265
JOHNSON MOTORS
Carl Klawonn
Administrative Assistant

CK/rkm

NOTE:  Post on your V4M-100 H.P. Index under the heading
       "Miscellaneous".

Historical references

SB-1109 originally introduced the replacement reverse lock link for power tilt installations. SB-1129 explains the subsequent change to locking lever 313671.

Referenced parts: 381991, 307265, 313671, and 305635.