Johnson Service Bulletin SB-1131 - Chafed Shift Cable

June 1967. Johnson warned dealers that Electramatic shift cables on certain 80 H.P. outboards could chafe against the rear exhaust housing cover, potentially causing an electrical short.

Johnson Motors Service Bulletin gray factory letterhead

June, 1967

SUBJECT: CHAFED SHIFT CABLE

ON MODELS: V4A(L) 18 & 19 - 80 H.P.

It has been reported that the Electramatic shift cable can become chafed and short out on the cast ledge of the rear exhaust housing cover. This ledge is utilized for mounting the rubber bumper required on the 100 H.P. models.

Whenever inspecting one of the above models for one reason or another, check the routing of this cable and if necessary, adjust the cable clamp to provide sufficient clearance in the above described area.

JOHNSON MOTORS Carl Klawonn Administrative Assistant

Related service information

For another factory shift-cable routing correction on a different engine family, see Johnson Service Bulletin SB-1123 (100 H.P. V4ML-12). The two bulletins apply to different models.