Johnson Service Bulletin SB-1150 - Locking Nut, Full Advance Stop Screw

Issued November 1967 for 1968 Johnson 65, 85 and 100 HP outboards. Johnson added jam nut 304753 to prevent full advance stop screw movement and changes in ignition timing and synchronization.

Johnson Motors Service Bulletin letterhead

November, 1967

SUBJECT:
LOCKING NUT - FULL ADVANCE STOP SCREW
ON MODELS:
VX(L), VXH(L) - 65 H.P., 1968
V4S(L), V4A(L) - 85 H.P., 1968
V4T(L) - 100 H.P., 1968

Due to recent tests and field experience, we have added one 304753 Jam Nut to the Full Advance Stop Screw. This screw is located on the port side of the cylinder, and is a 7/16" Hex Head Nylok Cap Screw. Even with the Nylok device, it has a tendency to rotate, thus affecting timing and synchronization.

After installing the Jam Nut, adjust timing and synchronization according to Service Bulletin SB-#1149, "Introduction To Capacitive Discharge Ignition With Breaker Points".

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant

CK/rkm

NOTE: Post on your V4 - 80 H.P. and VM - 100 H.P. Indexes under the heading "Ignition".

Related bulletin and parts reference

304753 - Jam nut for the full advance stop screw. See SB-1149 - Introduction to Capacitive Discharge Ignition with Breaker Points for the timing and synchronization procedure.