Johnson SB-1161 Rev. 1 - Inner Exhaust Covers with Deflectors

August 1968. Johnson announced an updated inner exhaust cover for the GT-10 115 HP outboard, including an important restriction on its use in APBA-OPC racing.

Johnson Motors Service Bulletin letterhead

SB-#1161 Rev. 1 August, 1968

SUBJECT: INNER EXHAUST COVERS WITH DEFLECTORS

ON MODEL: GT-10, 115 H.P.

Recently announced by our Engineers is a new, die-cast aluminum inner exhaust cover for the Hi-Performance model GT. This cover has exhaust deflectors which add more efficiency to the already highly tuned exhaust system and results in increased performance.

Presently available through your regular parts source, P/N 314849 Inner Exhaust Cover supersedes the stainless steel cover for the GT only as referenced on page 14 in your 1968 100 H.P. parts catalog, item #49, P/N 305746. Because of the additional thickness of the die-cast cover, longer screws are required which consist of:
2 - 307342; 4 - 302030; and 14 - 302288

A ruling by the APBA Outboard Pleasure Craft Commission, however, has prohibited use of this "deflector" plate in APBA-OPC races. When attending any APBA-OPC races through the balance of 1968 or until this part has been reapproved by APBA-OPC, the old plate, P/N 305746, must be used.

JOHNSON MOTORS

Carl Klawonn
Administrative Assistant

CK/rkm

NOTE: Destroy Service Bulletin #1161 dated May, 1968.