Johnson Service Bulletin SB-1162 - Oversize Pistons & Piston Rings

Issued April 1968, this Johnson Motors bulletin lists newly released oversize pistons and rings for the GT-10 115 H.P. outboard, with original net prices and a cylinder-head requirement referenced in SB-1161.

Johnson Motors Service Bulletin factory letterhead

April, 1968

SUBJECT:   OVERSIZE PISTONS & PISTON RINGS

ON MODEL:   GT-10, 115 H.P.

Should re-boring of GT cylinders be necessary, oversize pistons and piston rings have now been released for this model as follows:

Oversize Pistons-

#420C1626 - .025" over @ $17.20 net each
#420C1625 - .125" over @ $18.50 net each

Oversize Rings for above-

#420B1627 - .025" over @ $5.60 net per set
#420B1539 - .125" over @ $6.50 net per set

NOTE:  P/N 420B1541-A Cylinder Head Gasket and low compression cylinder heads (see SB-#1161) must be used with P/N 420C1625 Pistons.  P/N 420B1541-A Gasket is priced at $5.60 net each.

The above parts should be ordered directly from Johnson Motors, Service Department, Waukegan, Illinois.

Oversize service piston #420C1625 will be superseded by a die-cast production piston as available.

JOHNSON MOTORS

Carl Klawonn

Administrative Assistant

CK/plr

Related factory information

SB-1161 is referenced by the factory for the low-compression cylinder heads required with the .125-inch oversize pistons. The prices above are historical 1968 net prices.