Johnson Service Bulletin SB-1178 - 25 HP Propeller

Issued January 1969, this factory bulletin explains why Johnson selected a 9 × 10 inch propeller as standard equipment on its 25R(L) 25 HP engines, despite better acceleration with a 9 × 9 inch propeller on some boats.

Johnson Motors Service Bulletin letterhead

January, 1969

SUBJECT:25 H.P. PROPELLER
ON MODEL:25R(L) - 25 H.P.

The propeller currently being shipped with the subject motor is P/N 383629, 9" x 10".  Other propellers available are P/N 379717, 9" x 9", P/N 381801, 9" x 10½" and "Weedless" P/N 592959, also 9" x 10".

In many applications, it has been reported that the 9" x 9" propeller must be substituted for the 9" x 10" in order to obtain satisfactory performance. Thus, the question arises as to why the 9" x 9" is not shipped as standard equipment.

Engineering test data using three different boats under various loads indicate that, on some boats, the 9" x 9" would give better acceleration and load carrying capability. However, if the 9" x 9" propeller were used as standard equipment, we would run the hazard of engine damage due to too high a R.P.M.

JOHNSON MOTORS Carl Klawonn Administrative Assistant

CK:rkm

NOTE:  Post on your 25R Index under the heading "Miscellaneous."

Historical propeller references

25R(L) 25 HP: 383629 (9 × 10 in., factory standard); 379717 (9 × 9 in.); 381801 (9 × 10½ in.); 592959 (9 × 10 in., Weedless). This bulletin describes historical factory guidance, not a modern propeller fitment guarantee.

Related bulletin: SB-1137 - New Style Gearcase and Propellers.