Johnson Service Bulletin SB-1185 - Propellers Freezing on Propeller Shaft Spline

March 1969. Johnson warned that propellers on certain 55, 85 and 115 H.P. engines could seize onto their shafts, especially in salt water. The factory instructed dealers to lubricate the propeller shaft with OMC Type "A" Lubricant before assembly.

Johnson Motors Service Bulletin gray factory letterhead
March, 1969
SUBJECT: PROPELLERS FREEZING ON PROPELLER SHAFT SPLINE
ON MODELS: TR(L)-10, 55ES(L)69 85ES(L)69, 115ES(L)69
This bulletin calls your attention to possible freezing of the propeller to the propeller shaft on any of the above models. Several examples of this condition have already been brought to our attention.
The necessity of sufficiently lubricating the prop shaft prior to assembling the propeller can not be overemphasized, particu- larly when these engines are used in salt water. No lubrication may result in the propeller freezing to the propeller shaft.
Always use OMC Type "A" Lubricant in this preventative mainten- ance procedure.
JOHNSON MOTORS Doug Cankar Administrative Assistant
DC:rm
NOTE: Post on your TR-55 H.P., 85 H.P. and 115 H.P. Indexes under the heading "Lower Unit."

Historical service reference

Application: TR(L)-10, 55ES(L)69, 85ES(L)69 and 115ES(L)69. Factory recommendation: OMC Type "A" Lubricant applied to the propeller shaft splines before propeller installation. No lubricant part number is specified in this bulletin.