Johnson Service Bulletin SB-1193 - Restricted Fuel from Permanent Fuel Tank Installations

Issued May 1969 for 1969 Johnson 85 and 115 H.P. outboards, this bulletin warns that anti-siphon check valves and fuel-tank quick-disconnect fittings can restrict fuel delivery, causing lean operation and possible piston damage.

Johnson Motors Service Bulletin gray factory letterhead

May, 1969

SUBJECT:   RESTRICTED FUEL FROM PERMANENT FUEL TANK INSTALLATIONS

ON MODELS:   1969 - 85 H.P. and 115 H.P.

The use of anti-siphon check valves as standard equipment on some permanent fuel tank installations can cause critical problems when coupled into the fuel system of our 85 H.P. and 115 H.P. outboards.

It has been determined that on many permanently installed fuel tanks, the restriction in the anti-siphon check valves, and in the quick disconnect fittings which are installed on the top of these tanks to mate with our fuel hose assembly, have excessive fuel restrictions.

It has been determined that these restrictions will cause reduction of normal fuel flow.  This would cause the engine to run lean at full throttle with possible damage -- such as, burned pistons before the problem is noted and identified correctly.

JOHNSON MOTORS
Doug Cankar
Administrative Assistant

DC:rm

NOTE:  Post on your 85 and 115 H.P. Indexes under the heading
       "Miscellaneous."

Historical service reference

Applicable models: 1969 85 H.P. and 115 H.P. Johnson outboards. Concern: restricted fuel flow from permanent fuel-tank anti-siphon valves or quick-disconnect fittings. The factory warns of lean operation and potential burned pistons. This bulletin does not specify replacement part numbers.