Johnson Service Bulletin SB-1195 - Ventilation (Cavitation)

Issued June 1969 for 1969 Johnson 85 and 115 HP outboards. Johnson discusses propeller ventilation associated with transom height, references Dealer Letter 194, and provides the contemporary Boating Industry Association transom dimension diagram.

Johnson Motors Service Bulletin letterhead

June, 1969

SUBJECT:VENTILATION (CAVITATION)ON MODELS:1969 - 85 and 115 H.P.

We are aware of several reported cases of ventilation (cavitation) on 1969 85 and 115 horsepower engines. In the majority of the cases which we have investigated, we have found that the dimensions for the boat do not conform to BIA standards for transom height (See Figure 1).

In Dealer Letter #194, we noted that the use of an OMC propeller had in some cases eliminated a ventilation problem. If using the OMC propeller does not eliminate the ventilation, you will have to cut down the transom to fall within the BIA transom height standard dimension. IMPORTANT: Due to the hull design on some boats, it may be necessary to reduce the transom height to as little as 19-1/2" to eliminate the ventilation.

Original BIA Transom Dimensions diagram, showing transom cutout dimensions, notes and dimensions for single and twin outboard installations
FIGURE 1 - TRANSOM DIMENSIONS (original factory diagram)

DC:rm

Historical references

The bulletin refers to Dealer Letter #194 concerning OMC propellers and ventilation. The original BIA dimensional chart is retained as an image to preserve its precise technical annotations; the surrounding bulletin text is searchable and selectable.