Johnson Service Bulletin SB-993 - Air Inlet, Automatic Choke

Issued November 30, 1963, this bulletin identifies the automatic-choke air inlet on 1964 Johnson 40, 75 and 90 H.P. engines. The threaded inlet must not be capped, because blocking it prevents the automatic choke from operating.

Johnson Motors Service Bulletin gray letterhead

November 30, 1963 SB-#993

SUBJECT:  AIR INLET - AUTOMATIC CHOKE - 1964 ENGINES

The arrows in Figures 1, 2 and 3 point out the air inlet to the heat exchanger on automatic choke models. Although the air inlet is threaded, it is not to be capped in anyway. If it is covered, the automatic choke will not function.

1964 40 H.P. engine with arrow pointing to automatic choke air inlet
Figure 1 - 1964 40 H P Engine
1964 75 H.P. engine with air inlet identified
Figure 2 - 1964 75 H P Engine
1964 90 H.P. engine with air inlet identified
Figure 3 - 1964 90 H P Engine

JOHNSON MOTORS

Robert Compton
Administrative Assistant

RC:eb

NOTE: Post on your RD, RK-40 HP, V4-75 HP, and V4-90 HP indexes under the heading "Powerhead".

Related service bulletin

Factory filing instruction: File SB-993 after SB-992.